El teu blog de Linux en català

GNOME-Art Next Generation

GNOME-Art Next Generation és un programa que permet canviar de forma fàcil l’aspecte del GNOME. És exactament el mateix que l’aplicació que es fa servir per defecte al GNOME per canviar l’aparença, però té una novetat interessant.

El programa no mostra només els temes d’icones, fons d’escriptori, fonts, etc. instal·lats al sistema, sinó que mostra tots els temes de GNOME-Art. Això vol dir que podem triar entre una quantitat molt gran de fons d’escriptori, icones, decoració de finestres, etc. amb només un clic. Ja no caldrà anar a pàgines com gnome-look o la mateixa gnome-art per cercar nous temes o fons d’escriptori.

La instal·lació és més que senzilla, ja que no n’hi ha. Només cal descarregar el fitxer comprimit que us deixem al final, descomprimir-lo i fer doble clic sobre el fitxer .sh per executar-lo. El programa començarà a funcionar sense cap problema (cal comentar que ha de descarregar algunes quantes coses i això triga una estona).

En definitiva, una eina prou interessant per canviar l’aspecte de l’escriptori sense mal de caps i a només un clic del ratolí de distància.

http://developer.berlios.de/dbimage.php?id=3883

    • PellRoja on 4 d'abril de 2008 at 21:20

    Reply

    Està molt currat

    • volk on 5 d'abril de 2008 at 14:45

    Reply

    Ho he intentat provar a ubuntu 7.10 però o funciona em diu que manca mono , quin paquet instal·le ?

    • Pau on 5 d'abril de 2008 at 15:27

    Reply

    Ummm, és curiós. Tot i així:

    sudo apt-get install mono

    Si et demana llibreries, instal·la també mono-devel.

    Salut!

    • volk on 5 d'abril de 2008 at 23:50

    Reply

    hola Pau, he instal·lat mono de la forma:
    sudo aptitude install mono

    i al executar gonme-art em dona l’error:

    volk@ubuntu:~/GnomeArtNG-0.4.5$ sh ./runGnomeArtNG.sh
    The assembly mscorlib.dll was not found or could not be loaded.
    It should have been installed in the `/usr/lib/mono/2.0/mscorlib.dll’ directory.
    volk@ubuntu:~/GnomeArtNG-0.4.5$

    Sembla que aquest paquet està una mica verd.

    • volk on 5 d'abril de 2008 at 23:59

    Reply

    he instal·lat libmono-corlib2.0-cil i al executar sh ./runGnomeArtNG.sh surt:

    volk@ubuntu:~/GnomeArtNG-0.4.5$ sudo sh ./runGnomeArtNG.sh

    ** (./GnomeArtNg.exe:8008): WARNING **: The following assembly referenced from /home/volk/GnomeArtNG-0.4.5/GnomeArtNg.exe could not be loaded:
    Assembly: gtk-sharp (assemblyref_index=2)
    Version: 2.10.0.0
    Public Key: 35e10195dab3c99f
    The assembly was not found in the Global Assembly Cache, a path listed in the MONO_PATH environment variable, or in the location of the executing assembly (/home/volk/GnomeArtNG-0.4.5/).

    ** (./GnomeArtNg.exe:8008): WARNING **: Could not load file or assembly ‘gtk-sharp, Version=2.10.0.0, Culture=neutral, PublicKeyToken=35e10195dab3c99f’ or one of its dependencies.
    Stacktrace:

    Native stacktrace:

    mono [0x8194ca6]
    mono [0x81770ed]
    [0xffffe440]
    mono(mono_object_new+0x18) [0x80b596a]
    mono(mono_exception_from_name_two_strings+0x44) [0x80f0a45]
    mono(mono_get_exception_file_not_found2+0x4f) [0x80f0b9c]
    mono [0x810f9a7]
    mono [0x811a390]
    mono(mono_class_vtable+0x181) [0x80b29b3]
    mono(mono_object_new+0x18) [0x80b596a]
    mono(mono_exception_from_name_two_strings+0x44) [0x80f0a45]
    mono(mono_get_exception_file_not_found2+0x4f) [0x80f0b9c]
    mono [0x810f9a7]
    mono [0x811a390]
    mono(mono_class_vtable+0x181) [0x80b29b3]
    mono(mono_object_new+0x18) [0x80b596a]
    mono(mono_exception_from_name_two_strings+0x44) [0x80f0a45]
    mono(mono_get_exception_type_load+0x62) [0x80f0cfa]
    mono [0x811a36e]
    mono(mono_class_vtable+0x181) [0x80b29b3]
    mono [0x8176f1a]
    mono(mono_runtime_invoke+0x27) [0x80b0b2f]
    mono(mono_runtime_exec_main+0x142) [0x80b5383]
    mono(mono_runtime_run_main+0x27e) [0x80b5631]
    mono(mono_jit_exec+0xbd) [0x805a4cb]
    mono [0x805a5a8]
    mono(mono_main+0x1683) [0x805bdc9]
    mono [0x8059636]
    /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe0) [0xb7cd9050]
    mono [0x80595b1]

    Debug info from gdb:

    (no debugging symbols found)
    Using host libthread_db library “/lib/tls/i686/cmov/libthread_db.so.1”.
    (no debugging symbols found)
    (no debugging symbols found)
    (no debugging symbols found)
    (no debugging symbols found)
    (no debugging symbols found)
    [Thread debugging using libthread_db enabled]
    [New Thread -1211361584 (LWP 8008)]
    [New Thread -1221149808 (LWP 8010)]
    [New Thread -1215374448 (LWP 8009)]
    (no debugging symbols found)
    (no debugging symbols found)
    (no debugging symbols found)
    (no debugging symbols found)
    (no debugging symbols found)
    (no debugging symbols found)
    (no debugging symbols found)
    (no debugging symbols found)
    (no debugging symbols found)
    0xffffe410 in __kernel_vsyscall ()
    3 Thread -1215374448 (LWP 8009) 0xffffe410 in __kernel_vsyscall ()
    2 Thread -1221149808 (LWP 8010) 0xffffe410 in __kernel_vsyscall ()
    1 Thread -1211361584 (LWP 8008) 0xffffe410 in __kernel_vsyscall ()

    Thread 3 (Thread -1215374448 (LWP 8009)):
    #0 0xffffe410 in __kernel_vsyscall ()
    #1 0xb7e3e9f6 in ?? () from /lib/tls/i686/cmov/libpthread.so.0
    #2 0x0811bc9f in ?? ()
    #3 0xb78ed3ac in ?? ()
    #4 0x00000000 in ?? ()

    Thread 2 (Thread -1221149808 (LWP 8010)):
    #0 0xffffe410 in __kernel_vsyscall ()
    #1 0xb7e3b676 in pthread_cond_wait@@GLIBC_2.3.2 ()
    from /lib/tls/i686/cmov/libpthread.so.0
    #2 0x08120dde in ?? ()
    #3 0xb78551dc in ?? ()
    #4 0xb78551c4 in ?? ()
    #5 0xb7e39541 in pthread_mutex_lock () from /lib/tls/i686/cmov/libpthread.so.0
    #6 0x081210eb in ?? ()
    #7 0xb78551dc in ?? ()
    #8 0xb78551c4 in ?? ()
    #9 0x00000000 in ?? ()

    Thread 1 (Thread -1211361584 (LWP 8008)):
    #0 0xffffe410 in __kernel_vsyscall ()
    #1 0xb7d8f2a1 in select () from /lib/tls/i686/cmov/libc.so.6
    #2 0xb7eae780 in g_spawn_sync () from /usr/lib/libglib-2.0.so.0
    #3 0xb7eaeb4c in g_spawn_command_line_sync () from /usr/lib/libglib-2.0.so.0
    #4 0x08194d84 in ?? ()
    #5 0xb7b81844 in ?? ()
    #6 0xb7b8182c in ?? ()
    #7 0xb7b81828 in ?? ()
    #8 0xb7b81824 in ?? ()
    #9 0x00000000 in ?? ()
    #0 0xffffe410 in __kernel_vsyscall ()

    =================================================================
    Got a SIGSEGV while executing native code. This usually indicates
    a fatal error in the mono runtime or one of the native libraries
    used by your application.
    =================================================================

    Aborted (core dumped)
    volk@ubuntu:~/GnomeArtNG-0.4.5$

    • Pau on 6 d'abril de 2008 at 01:02

    Reply

    Bones!

    Ara mateix no tinc molt de temps per investigar amb l’error. Ràpidament, he vist que una altra dependència és:
    gtk-sharp2

    Prova a instal·lar-la i, sobretot, no executes el programa com a root (res de sudo).

    • motoko on 19 de juliol de 2009 at 12:30

    Reply

    No van per la versio 0.7?
    http://prdownload.berlios.de/gnomeartng/gnomeartng-0.7.0-jaunty.deb
    O no es el mateix programa?

    • Pau on 19 de juliol de 2009 at 14:12

    Reply

    Sí! Això és un article antic (l’he enllaçat per a que veiéreu la definició en català…).

    Salut!

Respon a PellRoja Cancel·la les respostes

Your email address will not be published.